Electrode Adapter SGJ to rod-shape electrode Select size::SGJ 24/25 to 6 mm dia. Material: Nickel Felt Roll

Material: Nickel Felt Roll

due to the limited glass chemical resistance

7")You may disconnect included 6mm screw as picture shown below

and 3) separation of the counter electrode from the working electrode by ion-exchange or nanoporous membrane by creating an H-Cell configuration

a separator should be placed between the two shanks of the heating element before hanging the element inside the furnace chamber

Electrode Adapter SGJ to rod-shape electrode Select size::SGJ 24/25 to 6 mm dia. Material: Nickel Felt RollThe electrode adapter is used for installing rod shape electrodes into laboratory glassware with SGJ standard port. It enables using disk electrode, plug with clip or any other rod shape electrode (e. g. graphite rod) or current collector (e. g. metal mesh, graphite coated metal mesh, metal foil, graphite coated metal foil, metal foam, carbon woven and non woven fabrics, carbon paper, etc.) as an electrode. The electrode adapter is made of PEEK. It