180 Degree Round Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (22.0 mm OD, 76.2 mm CLR) 200 "Bottle-Jack" This roll set will bend

This roll set will bend the following sizes of material: 1-1/2" x 1-1/2" Square

Additional Specifications: Maximum Material Thickness: 0

If you are a serious hobbyist

Notice how when values are entered into 2 or 3 directions at one time this is defining angles other than 90 degrees and will also define rotations

Outside Diameter of the Tubing (OD): 10

180 Degree Round Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (22.0 mm OD, 76.2 mm CLR) 200 "Bottle-Jack" This roll set will bendSpecs Outside Diameter of the Tubing (OD): 22. 0 mm Minimum Wall Thickness (DOM): 0. 058" (1. 5 mm) Minimum Wall Thickness (4130): 0. 058" (1. 5 mm) Minimum Wall Thickness (ERW): 0. 065" (1. 7 mm) Minimum Wall Thickness (Stainless): Contact for Details Minimum Wall Thickness (Aluminum): Contact for Details Minimum Wall Thickness (Other): Contact for Details Maximum Wall Thickness: 0. 134 (3. 4 mm) Centerline Radius: 3" (76. 2 mm) Maximum Degree of