Snap shackle Adaptor - PBB80, RBB80, CX25, GX25 High Load A "Do-it-yourself" kit based on

A "Do-it-yourself" kit based on a ø47 mm carbon spinnaker pole section with Seldén series 534-865 composite end fittings with Dyneema loops for lift and downhaul

The 60 mm sheave is supported by stainless steel ball bearings and stainless ballbearing races

Oil in the cylinder will then grease the membrane between the cylinder and the piston and prevent gas leakages

absorbing side loads from vertical angles and providing low friction for easy sail handling

LR: 275 mm

Snap shackle Adaptor - PBB80, RBB80, CX25, GX25 High Load A "Do-it-yourself" kit based onSnap shackle adaptor for PBB80, RBB80 block and downwind furlers CX25 and GX25. A brilliant solution for any application you want to attach and remove quickly, for example runners and check stays. Just replace the standard shackle with a snap shackle. SWL: 2500 kg BRL: 5000 kg Pin: 10 mm W : 18 mm L : 7 mm Width: 54 mm Height: 81 mm A: 22 mm