3d 5gal Bucket Siphon Hose and Filter Sock Holder NCCspecial Large - 2 rows 27mm

Large - 2 rows 27mm x 9mm oval

further protecting your tank mates from getting sucked to the pump and stuck on the guard

Frags on large plugs with 5 large polyp minimum

40mm length and 60mm length for a bit more light blocking

The front edge of the Trident is even with the edge of the shelf in either orientation (yellow circle)

3d 5gal Bucket Siphon Hose and Filter Sock Holder NCCspecial Large - 2 rows 27mm3D printed siphon hose holder for 5 gallon buckets. Will fit a standard 5 gallon bucket from the hardware store with 1 4" rim. Siphon hose outside dimension up to 5 8". Nylon screw to hold the hose in place in holder and screw on the outside of the holder to secure it to the bucket rim. The arm holding the hose has a slight downward angle to minimize water splashing out of the bucket while inserting the hose into the holder if the syphon is flowing.