AtomStack Cooling Fan Replacement for S20 Pro / X20 Pro / A20 Pro Laser Engraver Ship From:Europe 1 x 20W Focusing Lens

1 x 20W Focusing Lens

M7 automatic control air assist switch: with the AIC1 air assist control kit the lightburn software M7 mode can be used to automatically switch the air assist on and off according to different needs of engraving or cutting saving the power and increasing the life of the air assist

【Convenient for Higher Objects Engraving & Cutting】By increasing the height of the laser cutter and engraver machine

Product Dimensions: 150 x 188 x 98mm

Compatibility Note: Due to variations in original laser heights

AtomStack Cooling Fan Replacement for S20 Pro / X20 Pro / A20 Pro Laser Engraver Ship From:Europe 1 x 20W Focusing LensUsed for the cooling fan replacement for atomstack 20W optical power series engraver lasers (Model X20 S20 A20 Pro) and M100 laser modules Method: 1. Use a screwdriver to remove the four M3 screws on the top of the laser 2. Loosen the diagonal two fixing screws on the back of the laser and remove the current fan off the drive board (gentlely unplug the terminals) 3. Connect the new cooling fan to the drive board (refer to the video for wire