Hayward Strainer Cover O-Ring for Pool Pump Strainer Covers | SPX3000S Rope Anchors & Hardware keeping your suction-side cleaner operating

keeping your suction-side cleaner operating at peak efficiency between service intervals

sealing the joint between the pump housing halves to prevent water loss and maintain system pressure

your IntelliCenter system gains the dedicated interface circuitry required to operate cover motors — functionality not available on the base IntelliCenter board alone

Length 26" Outer Diameter 7" Top Inner Diameter 3" Bottom Inner Diameter 3" Material Point Bonded Pool Filtration Fabric Pleatco Advanced Features

This transformer steps down line voltage (115V or 230V) to the low-voltage control circuit that powers the heater's ignition and safety control board

Hayward Strainer Cover O-Ring for Pool Pump Strainer Covers | SPX3000S Rope Anchors & Hardware keeping your suction-side cleaner operatingThe Hayward Strainer Cover O Ring (SPX3000S) is the OEM replacement sealing O ring for Hayward pool pump strainer covers, maintaining a watertight seal between the strainer cover and pump body. IMPORTANT: LUBRICATION REQUIRED SOLD SEPARATELY Always lubricate this O ring with a silicone based lubricant before installation. Browse our Pool Plumbing Lubricants for a compatible silicone lubricant. This O ring seats at the interface between the pump