G04500 - SEMI G45 - Practice for Flash Characteristics of Thermosetting Molding Compounds StdTpc-FPD Masks It is intended to apply

It is intended to apply to polished wafers as specified in SEMI M1

the epitaxial layer must be of the same conductivity type as the substrate and should be at least twice as thick as the maximum depletion width in deep depletion to avoid errors caused by the proximity of the epitaxial interface (refer to ¶ 12

• Leadframe Interleaves

8-1103 (Reapproved 1211)

SI units are the reference units for this Guide

G04500 - SEMI G45 - Practice for Flash Characteristics of Thermosetting Molding Compounds StdTpc-FPD Masks It is intended to applyThis specification defines a procedure for measuring the flashing characteristics of semiconductor grade transfer molding compounds. The flashing tendency for semiconductor grade molding compounds depends on the interaction of several variables, including mold conditions, process parameters, molding compound viscosity, and curing characteristics. This test is not a valid method for predicting the flashing performance in all mold types. It is a method